Investigation of the LTC fuel performance index for oxygenated reference fuel blends

Niemeyer KE, Daly SR, Cannella WJ, Hagen CL. Fuel 155 :14–24 (2015).
Full text
Altmetrics
Share
tweet

# Abstract

A new metric for ranking the suitability of fuels in LTC engines was recently introduced, based on the fraction of potential fuel savings achieved in the FTP-75 light-duty vehicle driving cycle. In the current study, this LTC fuel performance index was calculated and analyzed for a number of fuel blends comprised of n-heptane, isooctane, toluene, and ethanol in various combinations and ratios corresponding to octane numbers from 0 to 100. In order to calculate the LTC index for each fuel, driving cycle simulations were first performed using a typical light-duty passenger vehicle, providing pairs of engine speed and load points. Separately, for each fuel blend considered, single-zone naturally aspirated HCCI engine simulations with a compression ratio of 9.5 were performed in order to determine the operating envelopes. These results were combined to determine the varying improvement in fuel economy offered by fuels, forming the basis for the LTC fuel index. The resulting fuel performance indices ranged from 36.4 for neat n-heptane (PRF0) to 9.20 for a three-component blend of n-heptane, isooctane, and ethanol (ERF1). For the chosen engine and chosen conditions, in general lower-octane fuels performed better, resulting in higher LTC fuel index values; however, the fuel performance index correlated poorly with octane rating for less-reactive, higher-octane fuels.

# BibTeX

 @article{Niemeyer:2015c,
Author = {Kyle E Niemeyer and Shane R. Daly and William J. Cannella and Christopher L. Hagen},
Title = {Investigation of the LTC fuel performance index for oxygenated reference fuel blends},
Year = 2015,
Journal = {Fuel},
Volume = {155},
Pages = {14--24},
doi = {10.1016/j.fuel.2015.04.010}
}